MANUAL DIVIDERS

Mechanical machine. Pressing, cutting and knife cleaning are carried out using levers.
spezzatrice_man_front
spezzatrice_man_lat
  • Basin
    Rettangolare
    vasca_rettangolare
    division min weight gr max weight gr basin capacity kg press hourly capacity pz/h
    20 150 550 11 80x120 1200

    Hexagonal
    vasca_esagonale
    divisions min weight gr max weight gr basin capacity kg key press hourly capacity pz/h
    19 90 300 6 85 1200
    37 30 130 5 57 2200

    Round
    vasca_tonda
    divisions min weight gr max weight gr basin capacity kg basin diameter mm hourly capacity pz/h
    20 150 550 11 460 2400

  • Dimensions
    dimensioni_spezzatrice_man
  • Info

    MACHINE CARE
    To allow the machine to operate correctly and above all to ensure a long service life, we recommend regular cleaning, both inside and out (see operation manual, chapter/ paragraph on cleaning). The stainless steel parts, painted coatings, PE500 polyethylene and PETG plates can be cleaned simply using water and soap or a neutral detergent, then rinsed thoroughly and dried with a soft cloth.

    MATERIALS USED
    Frame in electro-welded, painted steel;
    Coating in painted steel or stainless steel.
    Basins in anticorodal aluminium MG5 with anodising;
    Knives and grids in stainless steel 304;
    Inner cover surface and presses in polyethylene for foodstuff use PE500;
    Plates in polyethylene for foodstuff use PETG;
    Ring in aluminium with chemical nickel-plating.

    ELECTRICAL POWER SUPPLY
    All machines are provided standard for an operating voltage of 400 Volt 50 Hz 3-phase. Other voltages can be provided on request.
    All machines are in conformity with EC regulations and are manufactured in Italy.

  • Download